You may encounter an error message that says Windows XP is waking up from hibernation. Well, there are several ways to solve this problem, we will get to that in a moment.
Speed up your PC today.
Go to Start Menu -> All Programs -> Accessories -> Command Prompt, right-click and select Run as administrator.Enter influence: powercfg -h OFF.Press Enter, this will disable the hibernation feature.
This article explains how to disable and then enable hibernation on a Windows computer.
Applies to: Windows Server 2019, Windows 10, all features, Windows Server 2016, Windows 7 SP1, Windows Server 2012 R2, Windows Server 2008 R2 SP1
Original KB number: 920730
How To Disable Hibernation
How do I stop Windows hibernation?
Press the Windows key on my keyboard to bring up the start menu, probably the start screen.Search for commands.If UAC invites families, click Next.At the command prompt, type powercfg.exe /hibernate off, then type Journalists Enter.Type exit, then press Enter to close the command prompt window.
- Press the Windows tab on your keyboard to open the start menu or start screen.
- Search cmd. In the list of search results, right-click Command Prompt and select “Run asno administrator”.
- If prompted by User Account Control, click Next.
- At the command line, type
powercfg type.exe /hibernate off, then press Enter.
- Type exit and then just press Enter to close all command windows.
How To Access Sleep Mode?
- Press the Windows key on your keyboard to open the start menu and start screen.
- Search cmd. In the new list of search results, right-click Command Prompt and select Run as administrator.
- If prompted by User Account Control, click Next.
- At command during
powercfg type.exe /hibernate onpress Enter.
- Type exit, then press Enter to close the command line window.
How do I enable hibernation in Windows XP?
Simple steps if you want to enable hibernation in Windows XP: Step 1: Go to “Start” -> “Control Panel” -> “Power Options”. Step 2: Open Power OptionsData” -> “Power Options Properties” -> “Sleep Mode”. Step 3: In the Hibernation section, check the Enable hibernation box. Step 4: Finally, click “OK” and “Apply” as shown in the image below.
The hidden system file Hiberfil.sys is located in the root file of the drive where the operating system is installed. The Windows Kernel Power Manager reserves this file for you when you install Windows. The size of this file is about the same to help you determine the amount of RAM (Random Access Hold) installed. on your computer.
The computer workstation uses the Hiberfil.sys file to save a copy of the system call to disk if the hybrid sleep setting is currently enabled. If this file is present, the computer cannot go to sleep at all.
To add the hibernation option to startup, see the “Schedule, hibernate” section of Shut down, hibernate, or put your computer to sleep.
You may lose data if you do not enable hibernation, and data loss will occur when the cross type hibernation setting is enabled. If you do not enable hibernation, Hybrid Sleep Well will not work.
On laptops, two additional options called “On Battery” may appear instead of one selected option. Set both options to Disabled to disable hibernation.
Re-enable sleep mode by changing the setting to On. in step 5.
You can re-enable hibernation by typing othe steps above, type powercfg.exe -h on in the command instead, and usually change the Allow hybrid hibernation setting to Enabled.
You can re-enable hibernation by checking the Enable hibernation option. user
Why is my computer stuck on hibernating?
If your current computer is still showing “Sleep”, try shutting down your computer by pressing and holding the power button. Wait 10 seconds, then restart it and money if you can sleep through the days. If yes, then payment, if this is due to problems in the computer’s power settings.
Many people want to put their Windows PC to sleep when they are not in First PC mode. In the sleep action, they can not only save system power, but also wake up their particular Windows PC from sleep after 15 seconds.
While hibernation has the benefits listed above, it has some unique disadvantages. For example, this is not good for ideal continuous performance.
In order to go on and on saying that shutting down is not the point, many Windows users are looking for a completely new method instead of activating sleep mode. The answer is to enable hibernation in Windows XP, except that hibernation is enabled.
The answer is good, unfortunately, many people do not know how to return to hibernation in Windows XP. Similar issues have been discussed in many technical forums. ZdHere I am using one of them as an example.
I bought a Dell laptop with Windows XP. I don’t want to put my laptop to sleep because when the battery runs out, I will inadvertently lose all unsaved files and RAM.
For this reason, I plan to disable hibernation in Windows XP to resolve this issue. But I can’t find the hibernate button in the power options, can I? -Jenny
Yes, there is no hibernation mode by default in Windows XP. If you’re confused like Jenny, watch the show to hibernate Windows in XP.
Easy Steps To Enable Hibernation In Windows XP:
Step 4. Finally, click the OK or Apply button as shown in the image below.
Note. Before enabling hibernation in Windows XP, you need to find out if your computer is compatible with the ACPI implementation.
The generic name for ACPI is Configuration Modern Day and Power Interface. Hibernation requires a native system BIOS (Base/I/O) that supports ACPI.
Step 1. Click Start, type devmgmt.msc in the command, then press Enter on the device’s keyboard to launch go.
Step 3: Expand your computer in Device Manager as shown in the following figure.
If you see PC ACPI capability, your computer is usually using ACPI capability, and vice versa.
After setting hibernation mode in Windows XP, you can use hibernation mode directly in the “Turn off the computer” window and hold down the “Shift” key. Sleep option. go “sleep”.
Or you can use a third-party tool, the Windows Shutdown Wizard, to easily enable hibernation.
How do I wake up my computer from hibernation?
Click “Shut Down” or “Log Out” below, then click “Sleep.” On Windows 10, simply click Start and select Power > Sleep. Your computer screen flashes to indicate that many open files and settings are being saved and remains black. Press the Power button and any key on your keyboard to wake your computer from sleep.